BDSM sticker model 2

Have you always wanted a BDSM sticker on your car, refrigerator or (smooth) wall?

She has been selling SM toys for more than 2 years now and we have them in various colors and sizes.

Choose your color and size and your sticker will be sent to you within 3 days.

Please note, we only have the 10 cm version in stock as standard, the other sizes are plotted when ordering.

PLEASE NOTE, these are PLOTTED stickers, so once stuck the only thing visible is the color you selected, everything else has been cut away, so no white, gray or blue background can be seen anymore.

The colours :

- matte black, glossy white, matte bronze, matte gray

The formats:

- 10cm, 15cm, 20cm, 25cm, 29cm

If you would like a different size or color, please send us a message: https://sm-speeltjes.com/pages/contact

Manual how to stick the sticker?

First degrease the surface where you want to stick the sticker, using an ammonia solution (pour a good dash of ammonia into water).

Then let the surface dry thoroughly.

Take your sticker and place it on a flat, smooth surface with the drawing facing up.

Take a bank card and rub the transparent film over the entire sticker.

Now stick a piece of paper tape (or other adhesive tape) to the top of your sticker on the transparent side.

Stick your sticker, including the white backing foil, where you want it using the adhesive tape that you have just attached to the top of your sticker.

Now turn the sticker upwards (towards your applied piece of paper adhesive tape) and carefully peel off the white paper side of the sticker. BE CAREFUL that you do not pull the sticker itself or part of it, if this does happen, you can You can close the whole thing again and then loosen the paper completely with a curling motion.

Once the paper is off, you can hold the transparent foil at the top two corners and slowly bring it down just short of the glass or the surface you want to stick to. Hold the sticker away from the surface.

With your bank card, start at the top where the piece of paper tape hangs, slowly adhering the sticker to the surface little by little. Do this slowly so that there are as few air bubbles as possible between the sticker and the surface.

Once the sticker is completely attached, carefully peel the transparent foil from your sticker. Again, make sure that your sticker sticks well to the surface. If you have not degreased properly, your sticker may want to come along with the foil on top. this, then turn back a bit, rub the sticker in that place again with your bank card and continue.

Once the foil has been removed you can enjoy your newly applied sticker.